MAC Valves USA 4 port Boost Solenoid BCS 46A-AA1-JDBA -1BA

Description

Check out our
other items
!
Be sure to add us to your
favorites list
!
GENUINE MAC USA sourced from the same MAC authorised industrial distributor we have been buying from for many years.
Beware of counterfeit imports from Chinese and other countries outside the USA, even if they are based in the USA.
Universal 4 port boost control solenoid , typically used with wastegates that have 2 ports.  Allows a wider range of boost control than any other method because full boost can be applied on either side of the wastegate diaphragm.  This is used when you need more dynamic range than a 3 port solenoid can provide.  (We also offer Mac 3 port solenoids).
These are sourced in the USA from an official MAC source, yes MAC produces valves here and worldwide, however there are now fake low quality clones coming from overseas (China).
The same valve that many manufacturers re-label and mark up, why pay for a sticker?
Includes (4) dual sized Aluminum   hose barb fittings and one sintered vent/muffler.
Billet 6061 STEPPED Barbs fit both 5/32" AND 1/4" I.D hose sizes, makes it easy and half the weight of other barbs,(Racers are weight conscious)
Barbs tested to hold >=90 psi (with either hose size) even without clamps, we recommend clamps of course.
All the Ports are 1/8 NPT so you can use any common fitting that you want including AN-adapters.
Also includes one sintered high flow air muffler/vent filter.
The sintered filter makes the installation easier & cleaner because you don't have to run another hose to your air cleaner.
This boost control solenoid  will not degrade from  rich fuel mixtures or oil . Very high life and very resistant to sticking from contamination.
HI TEMP with plug-in black leads (brown wires used to be used for Hi-Temp in the non-plug in version)
Leads are 18" long.
12 volt DC , polarity not sensitive. Only two wires (might be hard to see in picture ).
5.4 watts
10-90% duty cycle, Set you driver to control these at 10-20 Hertz, the lower the frequency the wider the linear range.
1/8" npt ports
compatible with many & most boost controllers and ECU's : AEM,Autronic,E-boost etc,Neptune, Hondata,ECtune,Megasquirt,VEMS.
(4 ) 3/16" bhose barbs nipples
(1) sintered vent/muffler
This is an industrial quality valve, Autronic,e-boost and AEM,Hondata,Innovate,Autometer  have been using them for years on everything from rally cars to drag cars, there is a reason they use this valve, it is very durable and responsive.
Contact us for installation tips.
This valve can be driven by many stock ecu's as well as many aftermarket stand-alones and regular stand alone boost controllers.
See our other items if you are looking for  a 3 port   MAC 35A-AAA-DDBA-1BA
IT IS UP TO the PURCHASER to decide if this valve is suitable for it's intended use the seller will not be responsible for damage of any kind that may occur due to the use of this product!!!
YOUR SHIPPING ADDRESS MUST BE CONFIRMED WITH PAYPAL DO NOT ORDER OTHERWISE.
INTERNATIONAL INFORMATION:
YOUR SHIPPING ADDRESS MUST BE CONFIRMED WITH PAYPAL DO NOT ORDER OTHERWISE.
Interested in large quantity
contact us
:robertoATcircuitse7enDOTnet  (modify the anti spam spelling)
NEW
International shipments are all EXPRESS 4-6 day delivery on average,worldwide.
NEW
International shipments,include free shipping insurance and tracking !!! .
For SOME countries LOW COST USPS priority mail is available here :
https://www.ebay.com/itm/330681004581?item=330681004581&viewitem=&vxp=mtr#ht_2012wt_1165
International orders are shipped via USPS First Class EXPRESS International
International orders ; we charge a flat fee for up to 10 valves, you MAY NOT order more than
8
at once. (Make 2 separate orders if you want more than 8). This is because the flat rate envelope will only allow room for 8 pieces.
So for 1-8 valves the shipping cost is the same , so more is the better value!
The shipping and handling cost include: insurance,filling out customs forms,filing out express forms and the actual postage,and the packaging materials and labor time.
Sorry we used to allow the cheaper first class int'l shipping, but it has become too unreliable.Currently we are sending "test" packages worldwide to test first class  reliability.  If you want to try  First Class Mail now (it saves money), email here:
robertoATcircuitse7enDOTnet
30 day warranty on items returned if cosmetically perfect. So test it before mounting it! (contact with mounting points may blemish it)
15% handling fee on returned items.
(these valves are all tested before they are shipped and they are very robust ,we have not had any returned to us ever!)
Froo www.froo.com | Froo Cross Sell, Free Cross Sell, Cross promote, eBay Marketing, eBay listing Apps, eBay Apps, eBay Application