Sixty Four Pixels - Banana Split - 6 Way Midi Splitter/Thru Box

Description

Split MIDI 6 ways - a compact, cost-effective solution for musicians
** Come with a Power Adapter **
Sending MIDI to multiple devices should be simple! A thru-chain can add latency and you can't easily swap devices about during a performance, but a MIDI interface with multiple outputs can be expensive.
BANANA SPLIT is a simple, compact and cost effective solution for splitting a single MIDI input to six parallel MIDI outputs which can be "hot swapped" without impacting each other and offers near-zero latency on the MIDI signal.
The MIDI input is optically isolated, per MIDI-spec and each output is electrically buffered and protected with current limiting resistors.
This latest version of BANANA SPLIT can supply power to "bus powered" MIDI devices.
BANANA SPLIT includes a Beat LED which blinks with the MIDI clock. This provides both an indication that a MIDI clock is present and a "visual metronome" (which is always useful!)
MIDI IN connection can be made via a 3.5mm stereo jack socket as an alternative to the 5-pin MIDI input (do not try to use both inputs at the same time!). It works with a MIDI jack connections that use a "hot tip" (Novation, Arturia and others) - just use a stereo 3.5mm jack to jack cable connect up. Unfortunately Korg do not follow this standard, but you can use a lead which crosses over tip and ring, or just use the 5 pin socket to receive MIDI from Korg gear. All MIDI OUTs are 5-pin sockets.
BANANA SPLIT arrives fully assembled and tested. No assembly is required
The enclosure is laser-cut from 3mm translucent black acrylic sheet with yellow/black laser-engraved acrylic laminate face plate and frosted black acrylic end pieces.
Power is via a 2.1mm barrel connector as used on most "wall wart" type adaptors and standard on most stomp-boxes. An on-board diode bridge and voltage regulator mean that it will work with center positive or negative supply, and at any input voltage from 9-12V.
** Come with a 9 V Power Adapter  **
Input: 100-240V 50/60HZ
Output rating: 9V DC @ 0.66A
Output connector (ID x OD): 2.1mm x 5.5mm female center negative plug
DC cord length: 6 feet
U.S. 2 Prong Plug
Integral LED's indicate power supply, clock beat and activity on the MIDI input socket. Add to this the 5-Pin MIDI sockets for input and six outputs and that's pretty much it... It does what it says on the skin!
Size is 175mm x 55mm x 28mm Weight is approx 170g
All connections are via the front panel and can be accessed when the device is held (for example) in flight case foam or inset into a panel in a studio.
Return Policy:
All sales are final unless there is manufacture's defect or there was damage caused during shipment. You have 14 DAYS upon receipt of your order to file a claim.
International Buyers – Please Note:
Import duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility.
Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying.
** USPS First-class international shipping is shipped with "Delivery Confirmation" service. With this service, only eligible destination* will get the confirmation. The tracking will stop and cease to update once ineligible shipments depart the U.S.. Other international shipping service will be traceable.
* Eligible Destination immc2_